Made to Order Custom length 2 Days Turnaround 

Choose your Transfer Case Flange, and Rear Flange.

Toyota 4runner CV Rear Drive Shaft

This is what you need if your Toyota 4
Runner is lifted and you are experiencing
vibrations due to increased angles. Also a
great upgrade for Toyota that came with a
stock double cardan drive shaft. This is a
rear shaft only and can be made any length
you need from 35" to 50" long.

Toyota drive shaft lengths and flange
patterns vary. In our experience there is no
single standard length or flange patterns for
any particular model. To ensure that you get
the right thing you will need to take a couple
measurements before ordering your drive
shaft. You need to measure the distance
from your transfer case flange to your
differential flange. You will also need to
measure the bolt pattern at each end. It is
important that you measure the bolt pattern
on each end because they are often not the
same at both ends.

• Uses 1310 series universal joints. These are the most common size of u-joint there is. Replacement joints are much easier to find than stock Toyota style joints.
• Shaft uses 2.5" diameter .095" wall DOM Steel tubing. Better quality tubing than stock Toyota shafts use.
  
• Can be built using our greaseable universal joints or non-greaseable joints.