• Additional protection
• Textured, dark material
  
• Easy to apply
• Fits ALL 2021+ Broncos

2021+ Bronco 3D Carbon Glovebox Overlay Kit

Use the following video and written instructions to complete the install.  Upon receiving your items, remove them from the roll and lay them flat until they maintain a flat shape.  This prevents curling after installation.

NOTE:  Removing the glove box is simple.  Empty glove box, open and push the tabs in at the end.  The guide arm on the right side should come out of it's hole.  Move to a low position where the hinge at the bottom will allow for removal.  Reverse to re-install.

You will want to do this in 75-85 degree weather ideally.  Stay in the shade unless it is a little on the cool side.

Recommended items:

• This Kit
• Detailer spray to prep the area (without wax)
• Alcohol wipe
• Optional Heat gun or hair dryer
• Optional 3M promoter pen

Make sure the surface is clean.  Prep with alcohol pad if needed.  Use a dry install.  Align pieces and press down firmly.  Work slow to prevent creasing.

The adhesive reacts to PRESSSURE and HEAT.