The Jumper is a jersey top made using Zero Waste Pattern Cutting which is a bit like a puzzle. It is a method of pattern drafting where you utilise a length of fabric end to end by strategically planning your pattern pieces so that everything is used. This pattern does not require the printing of large pattern pieces, instead, you draw your pattern pieces directly onto your fabric with the aid of a cutting plan and templates.

The Zero Waste (ZW) Jumper has an oversized body with a curved hem and a slim sleeve making it perfect for layering. The body size and sleeve length are determined by the fabric width you use. The crew neck features a ribbed neckband, and the sleeve hem has a ribbed band attached when using narrower fabric widths. The ZW Jumper comes with tips to adjust the sleeve circumference for extended sizes, as well as a hack to make a smaller jumper size with a narrower fabric. 

Please note: This PDF sewing pattern uses zero waste pattern cutting and includes instructions to draw shapes directly onto your fabric. With the exception of some templates, there are no large pattern pieces to print out. You will receive a link to download the digital files after purchase. 

Sewing Level: Advanced Beginner. 

Recommended Fabric: 

The ZW Jumper is suitable for both woven (non-stretch) and knits (stretch). This jumper works really well in a mid-heavy weight brushed cotton fleece/sweater fabric (you can often find this fabric type in quite wide widths). It also works great as a lighter weight top in a thinner jersey fabric. If you want to use a non woven fabric choose something in a light - mid weight in a fabric that has a bit of drape to it.

For the neck and sleeve band choose a cotton ribbing that has a nice amount of structure to it. See 'Notions' for more on ribbing requirements. 

Pre-Washing: Knit fabrics are usually better washed after sewing when using this pattern, keep in mind the length may shrink slightly after washing the first time.  You can also pre-wash fabrics, particularly if they are woven fabrics. If you do this then make sure you order slightly more fabric to account for shrinkage

Sizing: This pattern is considered a one size garment. The finished garment size is determined by the fabric width and the pattern is suitable for widths between 145-175cm / 57-69".  

Please refer to the FIND YOUR SIZE tab for more information. 

Recommended fabric widths:

145-175cm / 57-69"

Yardage required:

Main Fabric: 80cm / 31.5"  (this gives a finished garment length of 60cm / 23.5" when worn. To adjust the length you will need to also adjust your fabric usage. Instructions on how to do this are included in the pattern).

Notions: 

• All Garment Views: one length of cotton bias binding to finish the facing, 4cm x 32cm / 1.5” x 12.5”.

   

• Garment view 1 & 2: one length of ribbing to finish the neck, 8cm x 43cm / 3.25” x 17”.

   

• Garment view 2: two lengths of ribbing to finish the sleeve hems, 16cm x 20cm / 6.5” x 8”.

Please note the length required can vary slightly based on the ribbing quality you are using as some ribbings need to be stretched on more than others so check this against your garment before cutting and sewing.