Do the panels mount to my existing body holes?

Universal kits require you to verify mounting hole alignment on your vehicle before final installation. Measure your OEM mounting points and compare to the kit panels — most setups line up directly, but some vehicles may need minor adjustments or new hole locations drilled. It's a 10-minute check that saves frustration later.

Will the tall wing cause trunk lid interference?

The VRX V1 wing geometry is designed with typical sedan and coupe rear decks in mind. Before committing to installation, test-fit the wing assembly in the closed position. If your trunk lid has an aggressive slope or pop-up design, confirm clearance — this is especially important on wide-body or heavily modified builds.

What kind of clear coat should I use on dry carbon?

Sand the dry carbon surface lightly and apply a UV-protective automotive clear coat in 2–3 thin coats. This locks in the weave, adds gloss, and prevents yellowing from sun exposure. Your local paint supplier can recommend products matched to your topcoat — just specify you're finishing real carbon fiber panels.